Home | Study Area | Automotive

Automotive

Operate And Maintain A 4WD Vehicle

If you are looking for work at a mine site or you are already working onsite and want to broaden your skillset we can help you gain the necessary skills to drive and maintain a 4WD in an environment beyond the city streets.

Pre-requisites

Study pathway

Job opportunities

Pre-requisites
Study pathway
Job opportunities

Delivery location, important dates and study options

Overview

Outline

Fees and charges

About the lecturer

Other requirements

Overview
Outline
Fees and charges
About the lecturer
Other requirements
Enquire now
Call us
Email us

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Qualification level

Clean up clone

Link to photo for PDF:

Course title:

National and state ID:

About this course:

Overview:

Entrance requirements:

Entrance requirements additional text:

Prerequisites

Study pathway

Job opportunities

Important information

Fees and charges

How to apply

Print units tab

Units

Proposed timeline

Generic info:

CERTIFICATE III IN LIGHT VEHICLE MECHANICAL TECHNOLOGY

Entrance Requirements

Prerequisites

Study pathway

Job opportunities

Important information

Entrance Requirements
Prerequisites
Study pathway
Job opportunities
Important information

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Overview
Fees and charges

View our Indicative Fees list 

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

 

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Units
How to apply

If this course uses TAFE Admissions, to study full-time in 2018 apply through tasonline.tafe.wa.edu.au.

Part-time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

T 1300 300 822
E  enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Enquire now
Call us
Email us

Please make sure you select a campus in the units tab otherwise no course study plan information will be printed.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Qualification level

Clean up clone

Link to photo for PDF:

Course title:

National and state ID:

About this course:

Overview:

Entrance requirements:

Entrance requirements additional text:

Prerequisites

Study pathway

Job opportunities

Important information

Fees and charges

How to apply

Print units tab

Units

Generic info:

Certificate II in Automotive Electrical Technology (Automotive Electrical Pre-Apprenticeship)

Entrance Requirements

Prerequisites

Study pathway

Job opportunities

Important information

Entrance Requirements
Prerequisites
Study pathway
Job opportunities
Important information

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Overview
Fees and charges

View our Indicative Fees list 

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

 

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Units
How to apply

If this course uses TAFE Admissions, to study full-time in 2018 apply through tasonline.tafe.wa.edu.au.

Part-time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

T 1300 300 822
E  enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Enquire now
Call us
Email us

Please make sure you select a campus in the units tab otherwise no course study plan information will be printed.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Qualification level

Clean up clone

Link to photo for PDF:

Course title:

National and state ID:

About this course:

Overview:

Entrance requirements:

Entrance requirements additional text:

Prerequisites

Study pathway

Job opportunities

Important information

Fees and charges

How to apply

Print units tab

Units

Generic info:

Certificate II in Automotive Servicing Technology [Light Vehicle Servicing Pre-Apprenticeship]

Entrance Requirements

Prerequisites

Study pathway

Job opportunities

Important information

Entrance Requirements
Prerequisites
Study pathway
Job opportunities
Important information

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Overview
Fees and charges

View our Indicative Fees list 

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

 

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Units
How to apply

If this course uses TAFE Admissions, to study full-time in 2018 apply through tasonline.tafe.wa.edu.au.

Part-time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

T 1300 300 822
E  enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Enquire now
Call us
Email us

Please make sure you select a campus in the units tab otherwise no course study plan information will be printed.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Qualification level

Clean up clone

Link to photo for PDF:

Course title:

National and state ID:

About this course:

Overview:

Entrance requirements:

Entrance requirements additional text:

Prerequisites

Study pathway

Job opportunities

Important information

Fees and charges

How to apply

Print units tab

Units

Generic info:

Certificate II in Automotive Air Conditioning Technology

Entrance Requirements

Prerequisites

Study pathway

Job opportunities

Important information

Entrance Requirements
Prerequisites
Study pathway
Job opportunities
Important information

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Overview
Fees and charges

View our Indicative Fees list 

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

 

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Units
How to apply

If this course uses TAFE Admissions, to study full-time in 2018 apply through tasonline.tafe.wa.edu.au.

Part-time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

T 1300 300 822
E  enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Enquire now
Call us
Email us

Please make sure you select a campus in the units tab otherwise no course study plan information will be printed.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Qualification level

Clean up clone

Link to photo for PDF:

Course title:

National and state ID:

About this course:

Overview:

Entrance requirements:

Entrance requirements additional text:

Prerequisites

Study pathway

Job opportunities

Important information

Fees and charges

How to apply

Print units tab

Units

Generic info:

Certificate II in Automotive Vocational Preparation

Entrance Requirements

Prerequisites

Study pathway

Job opportunities

Important information

Entrance Requirements
Prerequisites
Study pathway
Job opportunities
Important information

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Overview
Fees and charges

View our Indicative Fees list 

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

 

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Units
How to apply

If this course uses TAFE Admissions, to study full-time in 2018 apply through tasonline.tafe.wa.edu.au.

Part-time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

T 1300 300 822
E  enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Enquire now
Call us
Email us

Please make sure you select a campus in the units tab otherwise no course study plan information will be printed.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Qualification level

Clean up clone

Link to photo for PDF:

Course title:

National and state ID:

About this course:

Overview:

Entrance requirements:

Entrance requirements additional text:

Prerequisites

Study pathway

Job opportunities

Important information

Fees and charges

How to apply

Print units tab

Units

Generic info:

Certificate III in Automotive Electrical Technology

Entrance Requirements

Prerequisites

Study pathway

Job opportunities

Important information

Entrance Requirements
Prerequisites
Study pathway
Job opportunities
Important information

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Overview
Fees and charges

View our Indicative Fees list 

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

 

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Units
How to apply

If this course uses TAFE Admissions, to study full-time in 2018 apply through tasonline.tafe.wa.edu.au.

Part-time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

T 1300 300 822
E  enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Enquire now
Call us
Email us

Please make sure you select a campus in the units tab otherwise no course study plan information will be printed.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Qualification level

Clean up clone

Link to photo for PDF:

Course title:

National and state ID:

About this course:

Overview:

Entrance requirements:

Entrance requirements additional text:

Prerequisites

Study pathway

Job opportunities

Important information

Fees and charges

How to apply

Print units tab

Units

Generic info:

Certificate II in Automotive Electrical Technology (Automotive Electrical Pre-Apprenticeship)

Entrance Requirements

Prerequisites

Study pathway

Job opportunities

Important information

Entrance Requirements
Prerequisites
Study pathway
Job opportunities
Important information

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Overview
Fees and charges

View our Indicative Fees list 

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

 

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Units
How to apply

If this course uses TAFE Admissions, to study full-time in 2018 apply through tasonline.tafe.wa.edu.au.

Part-time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

T 1300 300 822
E  enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Enquire now
Call us
Email us

Please make sure you select a campus in the units tab otherwise no course study plan information will be printed.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Qualification level

Clean up clone

Link to photo for PDF:

Course title:

National and state ID:

About this course:

Overview:

Entrance requirements:

Entrance requirements additional text:

Prerequisites

Study pathway

Job opportunities

Important information

Fees and charges

How to apply

Print units tab

Units

Generic info:

Certificate II in Automotive Vocational Preparation

Entrance Requirements

Prerequisites

Study pathway

Job opportunities

Important information

Entrance Requirements
Prerequisites
Study pathway
Job opportunities
Important information

Delivery location, important dates and study options

Overview

Fees and charges

Units

How to apply

Overview
Fees and charges

View our Indicative Fees list 

Local full time students

Course fees are made up of two components, tuition fees and resource fees.

Tuition fees are determined by multiplying the course fee rate by the nominal hours, which is the number of hours in which an average student could be expected to complete each unit. They are not the hours of training or instruction.

Resource fees are charges for material that are essential to a course or unit, and are purchased by NMT to be used by students during the course.

Fees may vary depending on the units you are enrolled in so an approximate amount has been shown. You will be given the exact amount of your fees at enrolment. Part time student fees will vary depending on the number of units you are enrolled in.

Please note, you may also need to buy textbooks or equipment for your course.

 

International Students

If this course is available for International students you will need to pay your course fees to TIWA when you accept your offer.

Units
How to apply

If this course uses TAFE Admissions, to study full-time in 2018 apply through tasonline.tafe.wa.edu.au.

Part-time enrolments are usually done in late January and mid June each year while online and continuous enrolment courses normally have enrolments available at any time, for help enrolling or for more information:

T 1300 300 822
E  enquiry@nmtafe.wa.edu.au

International students please contact www.tafeinternational.wa.edu.au.

For apprenticeships and traineeships, you must be employed in a training contract by an appropriate organisation to study.

For all other enquiries please call us on 1300 300 822 or email: enquiry@nmtafe.wa.edu.au

Enquire now
Call us
Email us

Please make sure you select a campus in the units tab otherwise no course study plan information will be printed.

Course enquiry

Please note: This form is only for course enquiries. If you would like to apply or require further application information, please visit our Apply and Enrol page.

Qualification level

Clean up clone

Link to photo for PDF:

Course title:

National and state ID:

About this course:

Overview:

Entrance requirements:

Entrance requirements additional text:

Prerequisites

Study pathway

Job opportunities

Important information

Fees and charges

How to apply

Print units tab

Units

Generic info: